Removal Procedure
- Remove the battery box. Refer to Battery Tray Replacement .
- Install the engine support fixture. Refer to Engine Support Fixture .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the front transmission mount through fastener (1).
- Remove the rear transmission mount through fastener (1).
- Remove the transmission mount to transmission fasteners (1). Discard the bolts.
- Using the engine support, lower the transmission enough to provide clearance for the left transmission mount.
- If applicable, disengage the wiring harness from the frame rail fastener stud.
- Remove the transmission mount to frame rail fasteners (1).
- Remove the left transmission mount (2).
NOTE:
Some vehicles may be equipped without a stud fastener.