Engine Support Fixture

Fig 1: Engine Support Fixture

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LTG) . Remove the hood strut. Refer to Hood Strut Replacement . Remove the charge air cooler outlet air tube. Refer to Charge Air Cooler Outlet Air Tube Replacement (LTG) . Special Tools EN-51007 Engine Support Fixture.For equivalent regional tools. Refer to Special Tools .
1	Engine Support Fixture Adapter Leg (Qty:2) Procedure Install the bracket to fender frame. Do not install on top of the fender lip.
2	Main Support Beam
3	Cross Bracket (Qty:2)
4	Strut Tower Support Assembly (Qty:2) Procedure Adjust the length of the strut tower support assembly.
5	Radiator Tube Shelf Assembly (Qty:2)
6	Hook Assembly (Qty:2) Procedure If the engine is not equipped with engine lift brackets, install J-36857 engine lift bracket in place. Use a grade 10.9 bolt to install the engine lift bracket.