LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the rear wheel bearing and hub. Refer to Rear Wheel Bearing and Hub Replacement (GNC) Rear Wheel Bearing and Hub Replacement (GNE) .
    4. Fig 1: Removing Wheel Stud From Hub Flange
    GM361843Courtesy of GENERAL MOTORS COMPANY
  4. Use CH-49455  remover (1) to remove and discard the wheel stud.
scientia non olet · About LEMON Manuals