Front Fender Replacement

Fig 1: Front Fender & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the headlamp. Refer to Headlamp Replacement . Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement . Remove the front wheelhouse rear liner. Refer to Front Wheelhouse Rear Liner Replacement . Remove the body hinge pillar lower insulator.
1	Front Fender Fastener (Qty:7) CAUTION: Refer to Fastener Caution . Procedure Use a grease pencil to mark the alignment of the fender before removing the fastener. Tighten 9 N.m (80 lb in)
2	Front Fender Fastener Procedure Open the door to access the fastener. Tighten 9 N.m (80 lb in)
3	Front Fender Procedure Pull gently to remove the fender. Transfer parts as needed. Align the fender after installing as needed.