LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Folding Seat Back Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement (Folding)  or Rear Seat Back Replacement (Non-folding) .
  2. Remove the rear seat back bolsters. Refer to Rear Split Folding Seat Back Bolster Replacement .
    3. Fig 1: Identifying Seat Back Frame Pivot
    GM802802Courtesy of GENERAL MOTORS CORP.
  3. Remove the pivot bolts (1) from the seat back frame.
    4. Fig 2: Positioning Left Rear Seat Back & Seat Back Frame
    GM530836Courtesy of GENERAL MOTORS CORP.
  4. Remove the left rear seat back from the seat back frame.
    5. Fig 3: View Of Right Rear Seat Back & Seat Back Frame
    GM530927Courtesy of GENERAL MOTORS CORP.
  5. Remove the right rear seat back from the seat back frame.
    6. Fig 4: Identifying J-Hook Retainer At Bottom Of Seat Back
    GM530878Courtesy of GENERAL MOTORS CORP.
  6. Unhook the J-hook retainers at the bottom of the rear seat back.
  7. Lift up the seat back trim material in order to expose the hidden trim flaps, and remove the staples.
    8. Fig 5: Identifying Hoop & Loop Fasteners
    GM519886Courtesy of GENERAL MOTORS CORP.
  8. Reach inside of the rear seat back cover in order to unfasten the hook and loop retainers that secure the cover to the pad.
  9. Remove the folding armrest, if equipped. Refer to Rear Seat Armrest Replacement .
    10. Fig 6: Removing Cover From Rear Seat Back
    GM530908Courtesy of GENERAL MOTORS CORP.
  10. Remove the cover from the rear seat back by pulling the cover up and over the pad.
scientia non olet · About LEMON Manuals