Removal Procedure
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
- Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement .
- Remove the screws retaining the air temperature actuator (2).
- Disconnect the electrical connector from the air temperature actuator.
- Remove the air temperature actuator from the HVAC module assembly.