Instrument Panel Compartment Replacement

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Panel (I/P) Compartment

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . NOTE: Refer to Fastener Notice .
1	Instrument Panel Compartment Door Tip: Open the door and release the check strap. Squeeze inward at the top of the check strap and rotate downward to disengage from the instrument panel. Pull the compartment assembly away from the instrument panel to release from the hinges.
2	Instrument Panel Compartment Door Bushings (Qty: 2)
3	Instrument Panel Storage Compartment Screws (Qty: 4) Tighten: Tighten to 2 N.m (18 lb in)
4	Instrument Panel Compartment Tip: Partially remove the instrument panel compartment and disconnect the electrical connector from the compartment lamp.