LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement .
    3. Fig 1: View Of Recirculation Actuator
    GM1194922Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws that secure the recirculation actuator to the HVAC module assembly.
  4. Remove the recirculation actuator from the HVAC module assembly.
  5. Disconnect the electrical connector from the recirculation actuator.
scientia non olet · About LEMON Manuals