Installing the rubber mounts for the front rear axle differential mounting

• Pull the rubber mounting into the rear axle carrier using special tools 0 495 340 (33 4 351), 2 220 325 (33 0181), 0 494 981 (33 4 465) and 0 494 982 (33 4 466)  .
• Ensure that the special tool 2 220 325 (33 0 181)  is correctly positioned on the rear axle support.
• Remove special tools.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to LIFTING THE REAR AXLE DIFFERENTIAL .
• Refer to ATTACHING THE CENTRAL MOUNT OF THE PROP SHAFT .
• Refer to FASTENING THE WIRING HARNESS TO THE M SPORT DIFFERENTIAL .
• Refer to INSTALLING THE REAR HEAT SHIELD .
• Refer to INSTALLING THE COVER OF THE CAMBER CONTROL ARM ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE COMPLETE EXHAUST SYSTEM .
• Refer to INSTALLING REINFORCEMENT STRUT .
• Refer to INSTALLING TANK COVER ON LEFT AND RIGHT .