Install front intake pipe

• Replace O-rings.

  Parts:  O-rings

• Feed in and correctly position the intake pipe (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Place the intake pipe (2) on the air conditioning compressor.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• If necessary, insert coolant hose (1) into holder (2).
• Connect connectors (3) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the connector (1) to the alternator (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING CONTROL UNIT BRACKET .
• Refer to INSTALLING THE INTEGRATED POWER SUPPLY MODULE (PDM) .
• Refer to INSTALLING THE DME CONTROL UNIT .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to ACTIVATING ELECTRICAL SYSTEM .
• Refer to EVACUATING AND CHARGING CONDITIONING .