Installing the base plate
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Position the base plate (2) .
- Replace screws (1)
.
Parts: Screws
- Screw in the screws (1) until the base plate (2) can still be shifted.
- Close soft top.
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Base plate to window frame | ||
| Oval-head screw | Tightening torque | 8 Nm |
Follow-up work
- Refer to INSTALLING THE TRIM ON THE UPPER WINDSHIELD PANEL .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to INSTALLING THE SUN VISORS AND COUNTER SUPPORT ON THE LEFT AND RIGHT .