Installing the convertible top wiring harness

• Position the convertible top wiring harness (3)  on the existing holders and clip it in.
• Position Hall effect sensors (2)  .
• Secure expanding rivet (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly open the convertible top to enable accessibility.
• Lightly lift the holder (4)  and feed in the convertible top wiring harness (5)  and position it.
• Tighten the screws in area (3)  from the rear.
• Attach the convertible top wiring harness (1)  to the Velcro brackets (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1)  and lock.
• Clip in wiring harness (2)  on the clips.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the convertible top wiring harness (2)  at the cloth tabs (3)  .
• Connect the plug connections (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the cable ties (1)  .

  Parts:  Cable tie

• Position the convertible top wiring harness (2)  on the holders and attach with the cable ties (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING CONVERTIBLE TOP BOW, FRONT .
• Refer to INSTALLING COMPLETE CONVERTIBLE TOP .
• Refer to INSTALLING THE CONVERTIBLE TOP COMPARTMENT .
• Refer to INSTALLING THE CONVERTIBLE TOP COMPARTMENT LID .
• Refer to INSTALLING THE SUPPORT FOR THE REAR INNER WINDOW RECESS FINISHER COVER ON THE LEFT AND RIGHT .
• Refer to ADJUSTING THE REAR WINDOW SHAFT DIMENSION .
• Refer to INSTALLING THE REAR INNER WINDOW RECESS FINISHER STRIP ON THE LEFT AND RIGHT .
• Refer to INSTALLING LEFT AND RIGHT REAR SIDE TRIM PANEL .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE COVER FOR CROSS MEMBER AT THE TOP .
• Refer to INSTALLING THE UPPER TRIM PANEL ON ROLLOVER PROTECTION SYSTEM .
• Refer to INSTALLING THE REAR LEFT AND RIGHT HEAD RESTRAINT GUIDES .
• Refer to INSTALLING REAR LEFT AND RIGHT HEAD RESTRAINTS .
• Refer to REMOVING REAR SEAT BACKREST .
• Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT . b
• Refer to INSTALLING THE WINDOW CHANNEL STRIP AT REAR OUTER LEFT AND RIGHT .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
• Refer to INSTALLING THE TOP LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to ADJUSTING THE REAR SIDE WINDOW .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to DELETING FAULT MEMORY .