Removing windshield panel cover
Preliminary work
- Refer to MOVING THE HOOD TO THE SERVICE POSITION .
- Refer to REMOVING LEFT AND RIGHT WIPER ARM .
- Refer to REMOVING THE REAR HOOD SEAL .
- Release snap fasteners (1) of the washer fluid hoses.
- Unlock plug connection (2)
and disconnect.
- Release the cover (1) at the detents (arrow) and remove it.
- Release the cover (1)
at the detents (arrow) and remove it.
- Starting from the side of cowl cover (1) , release it upwards from the detent on the windshield.
- Release cowl cover (1) from detents (2) .
- Remove the cowl cover (1) .