Fit the roof lining
Precondition
The front seats have been fully adjusted towards the bottom
The front seat backrests have been fully adjusted towards the rear
- Install the end support of the sun visors (1) in the headlining and mount it with clamps (2)
- Check the clips (1) on the headlining (2) for damage and replace, if necessary
- With a support person, install the headlining (1) through the cutout of the rear window and correctly position
- Position and clip in the headlining (2) at the clips (1)
- Clip in the clips (2) on the headlining (1)
Follow-up work
- Refer to REPLACING THE SPACER .
- Refer to FOR REUSING: REMOVING THE ADHESIVE BEAD .
- Refer to INSTALLING THE REAR WINDOW .
- Refer to INSTALLING THE BRAKE LIGHT .
- Refer to TRIM OF THE 3RD INSTALLING THE BRAKE LIGHT .
- Refer to INSTALLING BOTH C-PILLAR TRIM PANELS .
- Refer to INSTALLING THE LEFT AND RIGHT B-PILLAR TRIM PANEL PARTIALLY .
- Refer to INSTALLING INTERIOR ROOF LIGHT .
- Refer to INSTALLING ALL GRAB HANDLES .
- Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRRORS .
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INSTALLING THE LEFT AND RIGHT HANDS-FREE MICROPHONE .
- Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
- Refer to INSTALLING COUNTER SUPPORTS FOR THE SUN VISOR ON LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS .
- Refer to INSTALLING THE TRIM PANEL FOR THE REAR LEFT AND RIGHT WATER CHANNEL .