51 11 050 Removing and attaching/replacing front bumper cover support

Preliminary work needed: 

• Refer to REMOVING FRONT BUMPER COVER .
• Refer to REMOVING THE FANFARE HORN .

Remove impact absorber (1).

Installation note: 

Check impact absorber (1). A damaged impact absorber (1) must not be reused.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Tightening torque 51 11 3AZ .

Remove support (2).

Courtesy of BMW OF NORTH AMERICA, INC.