51 11 156 Remove and install front bumper cover

Preliminary work needed:

Loosen screws.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Tightening torque 51 11 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

NOTE: Carry out work on the right side in the same way as for the left side illustrated here.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on left/right.

Tightening torque 51 11 2AZ .

NOTE: The following tasks must be carried out with a second person assisting:

Lift bumper cover (2) over guide (3).

Remove bumper cover (2) towards front.

If necessary, unlock associated plug connections and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.