Install brake guard plate, front

Courtesy of BMW OF NORTH AMERICA, INC.

• Install brake guard plate (2).
• Replace screws (1).

  Parts  : Screws

• Insert screws (1) and tighten.
  TIGHTENING TORQUE SPECIFICATION
  
  

  Brake guard plate at front swivel bearing
  M6x12 Replace screw.	tightening torque	8 Nm

Follow-up work 

• Refer to INSTALLING THE FRONT BRAKE DISCS .
• Refer to GREASE THE BRAKE PADS, BRAKE ANCHOR PLATE AND BRAKE CALIPER USING BRAKE PAD PASTE (17 INCH BRAKE) .
• Refer to INSTALLING FRONT BRAKE PADS .
• Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR .
• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
• Refer to COMMISSIONING/BEDDING IN (BRAKE) NEW BRAKE PADS AND BRAKE DISCS .