Install door lock

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Attach the Bowden cable nipple (2).
Attach the Bowden cable (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the linkage (1) in the door lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in the door lock (1) together with the outer door handle support.
Attach wiring harness.
Connect the connector on the door lock (1).
Position screws (2) to (4).
Tighten the screws in the sequence (2), (3), (4).

TIGHTENING TORQUE SPECIFICATIONS

Door lock to door
screw	Tightening torque	8.8 Nm

Fig 1: Door Lock Sequence Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in locking rod (5).
Ensure that the Bowden cable (1) and the wiring harness (2) are located at the rear side of the protective plate (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Version with soft-close function for doors:
Fasten the drive for the soft-close automatic function (1) on the door.

Connect the connector on the drive for the soft close motor (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Outside door handle support to door
screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install the attachment hood (2).
Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Attachment bell to outside door handle support
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALL THE FRONT OUTSIDE DOOR HANDLE .
Refer to INSTALLING THE PROTECTIVE PLATE FOR THE FRONT OUTSIDE DOOR HANDLE SUPPORT .
Refer to INSTALLING THE BRACING STRUT OF THE FRONT DOOR .
Refer to INSTALLING THE FRONT DOOR POWER WINDOW .
Refer to INSTALLING FRONT DOOR WINDOW GLASS .
Refer to INSTALLING THE PROTECTIVE PLATE ON THE FRONT DOOR .
Refer to INSTALL THE WINDOW CHANNEL STRIP ON THE FRONT DOOR ON THE OUTSIDE .
Refer to MOUNTING THE OUTSIDE REARVIEW MIRROR ONTO THE FRONT DOOR .
Refer to INSTALLING FRONT DOOR TRIM PANEL .
Refer to MOUNTING MIRROR TRIANGLE COVER .