Install the cup holder

• Connect associated connector.
• Install the cup holder (1).
• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Cup holder to center console
  Oval-head screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the insert (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING THE LEFT AND RIGHT KNEE PAD .
• Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
• Refer to ACTIVATE VEHICLE-SPECIFIC HIGH-VOLTAGE OR LOW-VOLTAGE ELECTRICAL SYSTEM .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .