Installing the left and right side center console trim
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing the side center console trim
- Correctly position the side center console trim (2) and engage it at the clamps (3).
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Side center console trim Oval-head screw Tightening torque 1.8 Nm
Follow-up work
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE LEFT AND RIGHT KNEE PAD .
- Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
- Refer to ACTIVATE VEHICLE-SPECIFIC HIGH-VOLTAGE OR LOW-VOLTAGE ELECTRICAL SYSTEM .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .