Installing fan cowl

Follow-up work 

• Refer to INSTALLING FRONT UNDERBODY PROTECTION .
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .

• Feed in and install the fan cowl (2) in the direction of the arrow.
• Lock left and right locking mechanisms (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the coolant hose to the clamps (1).
• Pin up connector (2) and lock audibly.
• Pin up connector (3) and lock audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the coolant hose to the clamps (1) at bottom on the fan cowl.

Courtesy of BMW OF NORTH AMERICA, INC.