Installing all the engine ventilation lines
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Position and guide in the engine ventilation line (3) towards the front.
- Position the intake pipe (2).
- Connect and lock intake pipe (2) and engine ventilation line (3).
- The retaining clips (1) must audibly engage.
- Position the engine ventilation line.
- Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Engine ventilation line | ||
|---|---|---|
| screw | Tightening torque | 9.3 Nm |
- Clip in the intake pipe (1) in the holder (2).
- Connect and lock the intake pipe (2).
- The retaining clip (1) must audibly engage.
- Connect and lock the engine ventilation line (2).
- The retaining clip (1) must audibly engage.
- Position engine ventilation line (2).
- Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Engine ventilation line | ||
|---|---|---|
| screw | Tightening torque | 9.3 Nm |
Follow-up work
- Refer to INSTALLING THE SOUND INSULATION OF THE INJECTORS, LEFT .
- Refer to INSTALLING THE SOUND INSULATION OF THE INJECTORS, RIGHT .
- Refer to INSTALLING THE LEFT INTAKE SILENCER BRACKET .
- Refer to INSTALLING BRACKET FOR RIGHT INTAKE SILENCER .
- Refer to INSTALLING BOTH INTAKE FILTER HOUSING .
- Refer to INSTALLING ACOUSTIC COVER .