Installing the left intake silencer bracket

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Position the holder (3) on the left.

Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Screw on the holder of the intake silencer
M6x16 screw
	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten nut (2).

TIGHTENING TORQUES SPECIFICATION

Nut on the holder of intake silencer
Nut M6
	tightening torque	8 Nm