Replace bumper cover, front

Preliminary work 

• Refer to REMOVING FRONT ORNAMENTAL GRILLE .
• Refer to PARTIALLY REMOVING THE LEFT AND FRONT RIGHT WHEEL ARCH TRIM .
• Refer to PARTIALLY REMOVING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
• Refer to REMOVING FRONT BUMPER COVER .
• Refer to REMOVING THE ORNAMENTAL GRILLE OF THE FRONT BUMPER COVER .
• Refer to REMOVING THE LID FOR THE AIR INLET ON THE LEFT AND RIGHT .
• Refer to REMOVING THE COVER OF THE FRONT BUMPER COVER .
• Refer to REMOVING THE REINFORCEMENT ON THE LEFT AND RIGHT BUMPER COVER .
• Refer to REMOVING LEFT AND RIGHT SIDE TRIM .

• Loosen screw (1)  .
• Release bumper bracket (2)  from clips (3)  and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the bumper cover (1)  .

  Parts:  Bumper cover

Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the bumper bracket (2)  into the detents (3)  .
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LEFT AND RIGHT SIDE TRIM .
• Refer to INSTALLING THE REINFORCEMENT ON THE LEFT AND RIGHT BUMPER COVER .
• Refer to INSTALLING THE COVER OF THE FRONT BUMPER COVER .
• Refer to INSTALLING THE LID FOR AIR INLET ON LEFT AND RIGHT .
• Refer to INSTALLING THE ORNAMENTAL GRILLE ON THE FRONT BUMPER COVER .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
• Refer to PARTIALLY INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .