Install the vibration absorber on the trunk lid

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Position the vibration absorber (2) on the tailgate.
Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Vibration absorber on the trunk lid
M6x14 screw	Tightening torque	6 Nm

G14315924

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Install the tailgate TRIM PANEL .
Mount both side rear window frame TRIMS .
Install the top rear window frame TRIM .
Install both trunk lid COVERS .
Install the trunk lid LIGHT .
Install the power tailgate SWITCH .