install the vibration absorber on the trunk lid
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Position the vibration absorber (2) on the tailgate.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Vibration absorber on the trunk lid M6x14 screw Tightening torque 6 Nm
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .
- Refer to MOUNTING BOTH TRIMS FOR THE REAR WINDOW FRAME ON THE SIDE .
- Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .
- Refer to INSTALLING BOTH TRUNK LID COVERS .
- Refer to INSTALLING THE TRUNK LID LIGHT .
- Refer to INSTALLING THE POWER TAILGATE SWITCH .