Install the control unit for the contactless trunk opening
- Connect all connectors (3).
- Clip in the control unit (2).
- Check the detents (1).
- Secure the sensor line at the top (1) with the clips (arrows).
Follow-up work
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING BOTH TRIM PIECES FOR THE EXHAUST TAILPIPE .
- Refer to INSTALLING THE TRIM ON THE REAR BUMPER PANEL .
- Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to ON VERSION WITH COMPACT SPARE WHEEL: INSTALLING THE STORAGE TRAYS .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .