Installing the instrument cluster (KOMBI)

• Connect and lock the connector (1) on the instrument cluster (KOMBI) (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in the instrument cluster (KOMBI) (2) and position it.
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Instrument cluster (KOMBI) to support
  Screw	tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Instrument cluster (KOMBI) to support
  Screw	tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DASHBOARD ON THE LEFT .
• Refer to INSTALLING THE SIDE PANEL ON LEFT DASHBOARD .
• Refer to INSTALLING THE CENTRAL INFORMATION DISPLAY (CID) .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE RIGHT DASHBOARD .
• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS . .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .