Install the stiffening plate

• Position thrust field (3)
• Replace screws (2)

  Parts:  Screws

• Tighten the screws (2)

Thrust field to front axle support
M10 Replace screw	Tightening torque	56 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)

Thrust field to heat shield
Screw	Tightening torque	3 Nm

Securing the left and right thrust field to the door sill 

• Version A (G80): 

Replace the screw (1)

Parts:  Screw

Tighten down screw (1)

Thrust field to door sill
M12 Replace screw	Tightening torque	100 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.

• Version B (G82/G83): 

Replace screws (1)

Parts:  Screws

Tighten the screws (1)

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)

Cover, steering unit
screw	Tightening torque	3 Nm

• Tighten down screw (2)

Wheel arch trim panel, front
Thermoplastic hexagon screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LEFT AND RIGHT FRONT UNDERSHIELD .
• Refer to INSTALLING FRONT UNDERBODY PROTECTION .
• Refer to INSTALLING THE FRONT SPOILER .