Install bearing bracket

• Coat the O-ring (1) with front differential oil.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the bearing bracket (2) at the engine oil pan.
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Bearing bracket to engine oil pan  .
  M8	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to FASTENING ACOUSTIC COVER ON THE OIL PAN .
• Refer to INSTALLING THE INSTALLATION PROTECTION RING OF THE RADIAL SHAFT SEAL .
• Refer to FOR REUSING: CHECKING THE GEARING OF THE OUTPUT SHAFT AND REPLACING THE CIRCLIP .
• Refer to INSTALLING THE OUTPUT SHAFT .
• Refer to CHECK/ADD FRONT DIFFERENTIAL OIL .
• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALLING THE COVER OF THE STEERING ASSEMBLY ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE RIGHT SPRING STRUT HOLDER .
• Refer to SECURING UPPER WISHBONE, RIGHT, AT THE SWIVEL BEARING .
• Refer to REMOVING THE TOP SWIVEL BEARING ATTACHMENT .
• Refer to ATTACHING THE FRONT SPRING STRUT .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT THE RIGHT REAR .
• Refer to FASTENING THE RIGHT OUTPUT SHAFT ON THE WHEEL BEARING .
• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .