Install lock cylinder

• Attach the locking rod (1)  .
• Install the lock cylinder (2)  and turn it counter-clockwise.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the cover (1)  .
• Clip in the cover (1)  in the points (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE OUTER DOOR HANDLE SUPPORT .
• Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
• Refer to PARTIALLY INSTALLING REAR INNER WINDOW CHANNEL STRIP .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE FRONT MODULE BRACKET .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE OUTER FRONT WINDOW CHANNEL STRIP .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .