Installing the guide tube for the oil dipstick

• Replace sealing ring (1).

  Parts  : Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the guide tube for the oil dipstick (1) in the arrow direction and install.
• Install the oil dipstick.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Guide tube for oil dipstick to cylinder head
  M6x14	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RIGHT-HAND CHARGE AIR COOLER .
• Refer to INSTALLING THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT (CHARGE AIR COOLER) .
• Refer to SEALING OFF COOLANT FOR LOW-TEMPERATURE COOLANT CIRCUIT .
• Refer to INSTALLING FRONT STIFFENING PLATE AND/OR UNDERBODY PROTECTION OF THE STEERING GEAR .
• Refer to REMOVING THE UNDERBODY PROTECTION OF THE STEERING GEAR AND THRUST FIELD RESPECTIVELY .
• Refer to INSTALLING FRONT UNDERBODY PROTECTION .
• Refer to CONNECTING THE LEFT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING FAN COWL .
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to INSTALLING BOTH FRONT-END STRUTS .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .
• Refer to FILLING AND VENTING THE LOW-TEMPERATURE COOLANT CIRCUIT .