Installing the base plate

• Position the base plate (2)  .
• Replace screws (1)  .

  Parts  : Screws

• Screw in the screws (1)  until the base plate (2)  can still be shifted.
• Close soft top.
• Tighten down screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Base plate to window frame
  Screw Replace screws	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER FOR THE TOP HEADLINER .
• Refer to INSTALLING THE TRIM ON THE UPPER WINDSHIELD PANEL .
• Refer to INSTALLING FRONT VANITY MIRROR LIGHT .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE LEFT AND RIGHT A-PILLAR TRIM PANEL .
• Refer to INSTALLING BOTH SUN VISORS AND COUNTER SUPPORTS .