Install rear power electric windows

• Check bolt (1) for fixed position, tighten if necessary.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Bolt to window regulator
  bolt	tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the rear power window (1) in the door and position it correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nut (1) with special tool 0 496 726 (51 0 400) by bracing the bolt (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power electric windows to door
  Combination hexagon nut, self-locking	tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nut (1) with special tool 0 496 726 (51 0 400) by bracing the bolt (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power electric windows to door
  Combination hexagon nut, self-locking	tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace adhesive pads (1).

  Parts:  Adhesive pads

• Install adhesive pads (1).
• Connect connectors (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the nut (1) with the special tool 2 351 398  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power electric windows to door
  Combination hexagon nut, self-locking	tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the nut (1) with the special tool 2 351 398  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DRIVE FOR ROLLER SUNBLINDS ON THE DOOR .
• Refer to INSTALLING REAR DOOR WINDOW GLASS (FIXED) .
• Refer to INSTALLING REAR DOOR WINDOW GLASS .
• Refer to INSTALLING THE REAR MODULE BRACKET .
• Refer to ADJUSTING THE REAR DOOR WINDOW GLASS .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to ATTACHING THE REAR OUTER WINDOW RECESS FINISHER STRIP .
• Refer to INITIALIZING THE POWER WINDOWS .