Install soft-close motor automatic function

• Attach Bowden cable (1)  from drive for soft-close motor (3)  to door lock (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install cover (1)  and clip in the detents (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING DOOR LOCK .
• Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
• Refer to PARTIALLY INSTALLING REAR INNER WINDOW CHANNEL STRIP .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE FRONT MODULE BRACKET .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE OUTER FRONT WINDOW CHANNEL STRIP .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .