Installing the rear left and right tweeters
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing the rear tweeter
- Correctly position the tweeter (2).
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Speaker to rear shelf/support/head restraint | ||
|---|---|---|
| Screw | Tightening torque | 1.8 Nm |
Installing the rear mid-range speaker
- Position the mid-range speaker (2).
- Connect connectors (1) and lock.
- Correctly insert the mid-range speaker into the storage shelf.
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Speaker to rear shelf/support/head restraint Screw Tightening torque 1.8 Nm - Correctly position the cover (1) and engage it in the storage shelf (2).
Follow-up work
- Refer to INSTALLING THE C-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
- Refer to INSTALLING BOTH REAR SIDE TRIM PANELS .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .