Removing seat and backrest frame
Preliminary work
- Refer to CHECKING THE FRONT SEAT FOR DAMAGE .
- Refer to REMOVING FRONT PASSENGER SEAT .
- Refer to FOR CONTINUING WORK ON THE FRONT SEAT: MOUNTING THE FRONT SEAT ON THE UNIVERSAL SEAT MOUNTING AND CONNECTING WITH THE WIRING HARNESS IF NECESSARY .
- Refer to REMOVING OUTER COVER ON FRONT SEAT .
- Refer to REMOVING INNER COVER FROM THE FRONT SEAT .
- Refer to REMOVING THIGH SUPPORT .
- Refer to REMOVING SEAT COVER WITH CUSHION FOR PASSENGER SEAT .
- Refer to REMOVING THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to REMOVING THE HEAD RESTRAINT .
- Refer to REMOVING THE BACKREST COVER WITH THE UPHOLSTERY FOR THE FRONT SEAT .
- Refer to REMOVING THE DRIVE MOTOR FOR THE HEADREST HEIGHT ADJUSTER .
NOTE:
The operations shown only for one side must be carried out on both sides.
- Loosen screws (1).
- Remove the seat frame (1).NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment. - Release all attached parts from the seat frame (1).NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment. - Detach all mounted parts from the backrest frame (1).