Removing seat cover with cushion for passenger seat

Courtesy of BMW OF NORTH AMERICA, INC.

Releasing the ground cable of the seat occupancy mat (CIS)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Loosen screw (1).
Loosen the cable clip (2).
Remove the ground cable (3) for the seat occupancy mat from the seat mechanism (4).

Courtesy of BMW OF NORTH AMERICA, INC.
Detach seat cover (1) in the areas (2).
Thread out seat cover (1) with the cushion and remove.
If necessary, disconnect existing plug connections and unclip cable clips.

Courtesy of BMW OF NORTH AMERICA, INC.