Installing the seat frame

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.

Position and fasten all mounted parts on the seat frame (1).
Correctly position the seat frame (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The operations shown only for one side must be carried out on both sides.
Replace screws (1).
Parts: Screws
Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING SEAT COVER WITH CUSHION FOR PASSENGER SEAT .
Refer to INSTALLING THIGH SUPPORT .
Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
Refer to INSTALLING OUTER COVER ON FRONT SEAT .
Refer to AFTER CONTINUING WORK ON THE FRONT SEAT: DISCONNECTING THE FRONT SEAT FROM THE WIRING HARNESS OF THE VEHICLE AND REMOVING IT FROM THE UNIVERSAL SEAT MOUNT .
Refer to INSTALLING FRONT PASSENGER SEAT .