Remounting the headlight seal

Removing the seal on the headlight 

• Detach the seal (3) from the stop (4).
• Detach the snap-in lugs (1) and remove the seal (2) from the headlight.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Install the seal on the headlight 

• Position the seal (2) on the headlight and engage it in the snap-in lugs (1).

  The snap-in lugs (1) must engage audibly.

• Connect the seal (3) with the retainer pin (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING HEADLIGHT .
• Refer to INSERTING TOP AUTOMATIC AIR FLAP CONTROL .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH COVERS .
• Refer to INSTALLING CENTER RADIATOR GRILLE .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .
• Refer to WHEN REPLACING LASER HEADLIGHTS: PROGRAM/ENCODE THE INTEGRATED LASER CONTROL UNIT .
• Refer to ADJUSTING HEADLIGHTS .