Replacing the foam cushion of the rear seat
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING THE REAR SEAT STORAGE TRAY .
- Refer to REMOVING LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to REMOVING REAR SEAT BACKREST .
- Refer to REMOVING THE FILLER PIECE .
- Refer to REMOVING THE BACKREST COVER WITH THE CUSHION .
- Refer to REMOVING THE SEAT COVER FOR REAR SEAT .
- Refer to REMOVING THE BACKREST COVERING .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the foam seat on the rear seat.
Parts: Foam cushion
Replacing heating mats of rear seat (SA4HA)
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled nondestructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled nondestructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the heating mats (1).
Parts: Heating mats
- Position the heating mats (1) on the new foam cushion (2) and align them.
- Bond heating mats (1) with the new foam cushion (2).