Remove rear seat backrest
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING LEFT AND RIGHT BACKREST SIDE SECTION .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- When removing the rear seat backrest (1), make sure that the backrest cover is not damaged by the floor panel (2) in the marked area.
- Release the screws (1) and remove the rear seat backrest (2).
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- When installing rear seat backrest (1), ensure that the backrest covering in the marked area is not damaged by floor panel (2).
- Position rear seat backrest (2).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATION
| Outer bearing of the rear seat backrest to body | ||
| Oval-head screw | Tightening torque | 42 Nm |
Follow-up work
- Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .