Installing top air duct
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Position top air duct and clip it in downward on the detents (1)
.
- Tighten down screws (1) and (2) .
TIGHTENING TORQUE SPECIFICATION
| Air duct above to front end | ||
|---|---|---|
| Oval-head screw with spring washer | tightening torque | 4 Nm |
| Flat-head screw M6x35 |
tightening torque | 4 Nm |
Follow-up work
- Refer to INSTALLING FRONT BUMPER COVER .
- Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
- Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH COVERS .
- Refer to INSTALLING CENTER RADIATOR GRILLE .
- Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .