Connect the coolant lines for the low-temperature coolant circuit

NOTE: TECHNICAL INFORMATION
Make sure that the connections are locked correctly. The locks must engage audibly.

Check sealing rings (1) of coolant lines (2) for damage.
If necessary, replace the damaged components.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock the coolant line (1) .
Coolant line (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to FILLING THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
Refer to VENTING THE LOW-TEMPERATURE COOLING SYSTEM .
Refer to INSTALLING BOTTOM FRONT COVER FROM THE SIDE .
Refer to INSTALLING FRONT UNDERBODY PROTECTION .