Installing post amplifier
- Insert and install the post amplifier (3) .
- Tighten the screws (2)
.TIGHTENING TORQUE SPECIFICATION
Amplifier/RAM to holder M5 screw Tightening torque 3 Nm Nut Tightening torque 3 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE HOLDER OF STORAGE TRAY IN THE LUGGAGE COMPARTMENT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE TRUNK COMPARTMENT LIGHT .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .