Installing The Engine Compartment Lid Hinge, Left

• Position the hood hinge (3).
• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Hood hinge
  M8 screw
  	Tightening torque
  	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the cable clip (1).
• Place gas spring (1) onto the ball head and engage the lock (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL THE ACTUATOR ON THE LEFT HOOD HINGE .
• Refer to INSTALL HOOD .
• Refer to INSTALLING JET CHAIN PARTIALLY .
• Refer to CHECK THE GAP DIMENSION OF THE HOOD .
• Refer to INSTALL THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .