51 16... Removing and installing trim for storage compartment

The following points must be strictly observed prior to starting work:

De-energize the HIGH-VOLTAGE SYSTEM .

Observe SAFETY INFORMATION for handling electric vehicles.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks: 

• Disconnect BATTERY EARTH LEAD
• Remove CENTER CONSOLE DECORATIVE TRIM 

Release screws (1).

Feed trim (1) upwards out of clamps (2).

Unlock associated plug connections and disconnect.

Remove cover (1).

Installation note: 

Replace faulty clamps (2).

When replacing, remount the following parts depending on the version: 

• 12 V POWER SOCKET
• USB AUDIO INTERFACE CONNECTING SOCKET
• EMF SWITCH