Removing the support for the lower front bumper panel

Preliminary work 

• Refer to REMOVING THE HOOD SEAL AT THE SIDE ON THE LEFT AND RIGHT .
• Refer to REMOVING THE SEAL FOR THE FRONT CENTER HOOD .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH COVER ON THE FRONT LEFT AND RIGHT .
• Refer to REMOVING TEMPERATURE SENSOR .
• Refer to REMOVING FRONT BUMPER COVER .

• Loosen screws (1)  .
• Guide out and remove the support for the bumper panel (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.