Remove the front top bumper support

Preliminary work 

• Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to REMOVING THE HOOD SEAL AT THE SIDE ON THE LEFT AND RIGHT .
• Refer to REMOVING THE SEAL FOR THE FRONT CENTER HOOD .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH COVER ON THE FRONT LEFT AND RIGHT .
• Refer to REMOVING TEMPERATURE SENSOR .
• Refer to REMOVING FRONT BUMPER COVER .
• Refer to REMOVING IMPACT ABSORBER .

• Loosen screw (1).
• Loosen screw (2).
• Loosen screws (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out the top front bumper support (1) in the direction of the arrow and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.