Installing the seat cover for the front seat (basis)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Place the seat cover on the cushion.
- Secure all trim wires with clamps.
- Replace the clamps (2)
.
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050) .
- Clasp the trim wire (3)
of the cushion (1)
and the trim wire (4)
of the seat cover with the clamp (2)
and bend the clamp (2)
.
1 Upholstery 2 Clamp 3 Trim wire in cushion 4 Trim wire in seat cover 5 Seat cover
Follow-up work
- Refer to FITTING THE SEAT COVER WITH THE UPHOLSTERY FOR THE FRONT SEAT .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT (MECHANICAL) .
- Refer to INSTALLING BACKREST ADJUSTMENT LEVER ON FRONT SEAT .
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to INSTALLING THE FRONT STRAP FITTING .